Welding Cell

Siegmund Welding Cell

Your introduction to automated production

Specifications

Components

Compatibility

Special table

Application examples

Products

A compact modular system

Modular system

configured and expanded for each specific application

More information >

Compatibility

compatible with all types of robots and cobots

More information >

Special table

Optimized for automation

More information >

Configuration

Special table for Welding Cell and accessories

More information >

Benefit from the advantages of the Siegmund welding cell:

configured and expanded for each specific application

compatible with all types of robots and cobots

compact design

high security standard

quick start-up

exclusive Siegmund cell design

simplified introduction into automation and series production

low initial costs and high efficiency

pre-configured cells available

A modular system customized to your needs

Roof

front hinged access doors
manual opening for access
crane access for loading

Vent

connection available for fume extraction system
standard 150mm and 200mm spigot diameter for connection to extraction system

Profiles

Cell from a Siegmund modular system of aluminum profiles
with extra edging for side walls

Side wall

protection against weld spatter
opaque aluminum composite panel
alternatively welding screen according to ISO 25980 in red or alternatively green

Corner profile

fixed side walls and doors
high stability
Installation height inside the cell approx. 1300 mm

LED progress indicator

signal indicator in green / red on the right and left corner profile

Door

double door access to cell
welding screen according to ISO 25980
position of doors configured to suit
manual opening for access

Partition wall

Aluminum composite panel
separation of cell for two operators

Console

elevated position of the cobot / robot
Aluminum profiles electrically insulated with hard boarding
individual height adjustment
available in two standard sizes
individual adjustment to the drilling pattern of the cobot / robot

Welding Table

working area for robot and fixtures
fastening of the zero point clamping system with perforated plates and the new Siegmund clamping system
various cells and table sizes available
compatible with all systems

Zero point clamping system & Perforated Plates

Simplified resetting for new fixtures and perforated plates
>> Zero point clamping system
>> Perforated Plates

Sub Table Box for Welding Cell

practical storage space
safe keeping of the pneumatic device for the zero point clamping system

Benefit from the advantages of the perfect interaction:

Benefit from a combination of Siegmund expertise in, a welding cell with zero point clamping, perforated plates and a new clamping system.

Small and large series fixtures effortlessly created with the Siegmund clamping system

Repeat and reused fixtures can remain on the perforated plate

Change the prepared perforated plate quickly and with a precise fit using the zero point clamping system

Start the welding process of the robot

User protection from weld spatter and radiation

New clamping system

More information >

Zero point clamping system

More information >

exclusive Siegmund cell design

‹

›

Special table for Siegmund Welding Cell – Optimized for automation

special borehole grid for fastening the individual components (Welding cell, partition wall, console, zero point clamping system, ST Box, …)

Borehole Ø 16 mm

Ventilation opening for anti-swirl extraction

Material thickness approx. 11,5 – 13 mm

optimal downward coverage

premium steel S355J2+N + Plasma nitration

Cable trunking below table

Special table 2000 x 1000 mm

Special table 2400 x 1200 mm

Special table 3000 x 1500 mm

Compatibility with standard Siegmund welding tables

The welding cell is also available in combination with standard Siegmund welding tables for an additional charge. Please contact us about this.

With standard Siegmund welding tables we recommend to close parts of the bore holes with cover caps (Item No. 160238.10 and 280238.10) to avoid unwanted air circulations during welding.

Special perforated plates for the Siegmund Welding Cell

Some of the perforated plates have recesses for the console of the robot and are therefore optimized for the use in the Siegmund welding cell. In combination with the zero point clamping system and the new clamping system, set-up times in automation and series production are reduced.

Perforated plate X8.7 950x800x12 Diagonal grid Plasma nitrided

$ 1,016.00

2-164006.X7

Stock item

Buy now

Perforated plate X8.7 1150x1000x12 Diagonal grid Plasma nitrided

$ 1,448.00

2-164007.X7

Stock item

Buy now

Perforated plate X8.7 1450x1150x12 Diagonal grid Plasma nitrided

$ 2,107.00

2-164008.X7

Stock item

Buy now

Console without individual adjustment of the drilling pattern

$ 456.00

2-004401

Stock item

Buy now

Adaptation of the console to the drilling pattern of the robot for a surcharge

$ 354.00

2-004401.X

Item produced on order

Buy now

Console incl. individual adjustment of the drilling pattern

$ 811.00

2-004401.1

Item produced on order

Buy now

Cover cap pack of 10 ‐ Galvanized

$ 32.00

2-160238.10

Stock item

Buy now

Cover cap pack of 10

$ 39.00

2-280238.10

Stock item

Buy now

‹

›

Configuration of the welding cell

Double doors with welding screens at the front
Aluminum composite panels on the sides and back
Partition wall for division into two working areas
Roof with connection possibility for welding fume extraction unit
LED progress indicator outside
Installation height inside the cell approx. 1300 mm

Welding Cell 2000 incl. console (without welding table)

Consisting of:
1x Welding Cell 2000
1x Console

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

For surcharge the welding cell is also available in combination with the following welding tables:

Table size 2000 x 1000 mm
System 16: Professional 750, Professional Extreme 8.7, Professional Extreme 8.7 PLUS
System 22: Professional 750, Professional Extreme 8.7, Professional Extreme 8.7 PLUS
System 28: Professional 750, Professional Extreme 8.7, Professional Extreme 8.8 PLUS

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 7,826.00

Item No.2-0020.RC

Stock item

Buy now

Welding Cell 2000 incl. special table

Consisting of:
1x Welding Cell 2000
1x Console
1x Special table for Welding Cell 2000 x 1000 mm
100x Cover cap (160238.10)

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 11,449.00

Item No.2-160020.RC1

Stock item

Buy now

Welding Cell 2000 incl. special table and accessories

Consisting of:
1x Welding Cell 2000
1x Console
1x Special table for Welding Cell 2000 x 1000 mm
2x Perforated plate 950 x 800 mm (164006.X7)
2x New clamping system Starter set (CS160001)
2x Zero point clamping system Set (ZP1620)
2x Pneumatic unit
1x ST Box for pneumatic unit
16x Fast Clamping Bolt without slot double (160511)
8x Vertical clamp 1800 (CS009082)
100x Cover cap (160238.10)

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 18,945.00

Item No.2-160020.RC2

Stock item

Buy now

Welding Cell 2400 incl. console (without welding table)

Consisting of:
1x Welding Cell 2400
1x Console

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

For surcharge the welding cell is also available in combination with the following welding tables:

Table size 2400 x 1200 mm
System 16: Professional 750, Professional Extreme 8.7, Professional Extreme 8.7 PLUS
System 22: Professional 750, Professional Extreme 8.7, Professional Extreme 8.7 PLUS
System 28: Professional 750, Professional Extreme 8.7, Professional Extreme 8.8 PLUS

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 9,016.00

Item No.2-0030.RC

Stock item

Buy now

Welding Cell 2400 incl. special table

Consisting of:
1x Welding Cell 2400
1x Console
1x Special table for Welding Cell 2400 x 1200 mm
100x Cover cap (160238.10)

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 14,349.00

Item No.2-160030.RC1

Stock item

Buy now

Welding Cell 2400 incl. special table and accessories

Consisting of:
1x Welding Cell 2400
1x Console
1x Special table for Welding Cell 2400 x 1200 mm
2x Perforated plate 1150 x 1000 mm (164007.X7)
2x New clamping system Starter set (CS160001)
2x Zero point clamping system Set (ZP1620)
2x Pneumatic unit
1x ST Box for pneumatic unit
16x Fast Clamping Bolt without slot double (160511)
8x Vertical clamp 1800 (CS009082)
100x Cover cap (160238.10)

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 22,709.00

Item No.2-160030.RC2

Stock item

Buy now

Welding Cell 3000 incl. console (without welding table)

Consisting of:
1x Welding Cell 3000
1x Console

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

For surcharge the welding cell is also available in combination with the following welding tables:

Table size 3000 x 1500 mm
System 16: Professional 750, Professional Extreme 8.7, Professional Extreme 8.7 PLUS
System 22: Professional 750, Professional Extreme 8.7, Professional Extreme 8.7 PLUS
System 28: Professional 750, Professional Extreme 8.7, Professional Extreme 8.8 PLUS

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 10,637.00

Item No.2-0040.RC

Stock item

Buy now

Welding Cell 3000 incl. special table

Consisting of:
1x Welding Cell 3000
1x Console
1x Special table for Welding Cell 3000 x 1500 mm
100x Cover cap (160238.10)

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 17,412.00

Item No.2-160040.RC1

Stock item

Buy now

Welding Cell 3000 incl. special table and accessories

Consisting of:
1x Welding Cell 3000
1x Console
1x Special table for Welding Cell 3000 x 1500 mm
2x Perforated plate 1450 x 1150 mm (164008.X7)
2x New clamping system Starter set (CS160001)
2x Zero point clamping system Set (ZP1620)
2x Pneumatic unit
1x ST Box for pneumatic unit
16x Fast Clamping Bolt without slot double (160511)
8x Vertical clamp 1800 (CS009082)
100x Cover cap (160238.10)

Configuration of the welding cell:
- double door access to cell
- Aluminum composite panels on the sides and back
- Partition wall for division into two working areas
- Roof with connection possibility for welding fume extraction unit
- LED progress indicator outside
- Installation height inside the cell approx. 1300 mm

Prices plus assembly and packaging/transport costs. You can find these in your individual offer.

‐ Special equipment: Delivery time approx. 6 weeks

More information

$ 27,089.00

Item No.2-160040.RC2

Stock item

Buy now

‹

›

For customization of the cell height, please contact us.

The item has been added to your shopping cart.

Your shopping cart

Continue shopping