Welding Table:
- Professional 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 11,5 – 13 mm
- Borehole Ø 16 mm
- Boreholes on the surface 50x50 mm grid
- Corners, edges and boreholes rounded
- Height of table side 100 mm
- Borehole spacing of table side 25 mm
- With scaling on the surface
- Construction reinforced with ribbing

Welding Table:
- Professional Extreme 8.7: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 11,5 – 13 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 16 mm
- Boreholes on the surface 50x50 mm grid
- Corners, edges and boreholes rounded
- Height of table side 100 mm
- Boreholes on table sides in diagonal grid
- With scaling on the surface
- Construction reinforced with ribbing

Welding Table:
- Professional 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 17 – 19 mm
- Borehole Ø 22 mm
- Boreholes on the surface 100x100 mm grid
- Corners, edges and boreholes rounded
- Height of table side 150 mm
- Borehole spacing of table side 50 mm
- With scaling on the surface
- Construction reinforced with ribbing

Welding Table:
- Professional Extreme 8.7: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 17 – 19 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 22 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- Height of table side 150 mm
- Borehole spacing of table side 50 mm
- With scaling on the surface
- Construction reinforced with ribbing

Welding Table:
- Professional 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 24,5 – 27 mm
- Borehole Ø 28 mm
- Boreholes on the surface 100x100 mm grid
- Corners, edges and boreholes rounded
- Height of table side 200 mm
- Borehole spacing of table side 50 mm
- With scaling on the surface
- Construction reinforced with ribbing

Welding Table:
- Table size: 2400x1200x200 mm
- through-hardened tool steel + plasma nitration
- Basic hardness corresponds to tool steel X8.7
- Surface hardness corresponds to tool steel X8.8
- Material thickness approx. 24,5 – 27 mm
- Borehole Ø 28 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- Height of table side 200 mm
- Boreholes on table sides in diagonal grid
- With scaling on the surface
- Construction reinforced with ribbing

Welding Table:
- Table size: 1600x1200x25 mm
- through-hardened tool steel + plasma nitration
- Basic hardness corresponds to tool steel X8.7
- Surface hardness corresponds to tool steel X8.8
- Material thickness approx. 24,5 – 27 mm
- Borehole Ø 28 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- M12-thread on 4 sides every 200 mm
- 8x45° chamfer for table leg mounting

Welding Table:
- Basic 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 11,5 – 13 mm
- Borehole Ø 16 mm
- Boreholes on the surface 50x50 mm grid
- Corners, edges and boreholes rounded
- Height of table side 50 mm
- Borehole spacing of table side 50 mm
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 11,5 – 13 mm
- Borehole Ø 16 mm
- Boreholes on the surface 50x50 mm grid
- Corners, edges and boreholes rounded
- Height of table side 100 mm
- Borehole spacing of table side 25 mm
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional Extreme 8.7: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 11,5 – 13 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 16 mm
- Boreholes on the surface 50x50 mm grid
- Corners, edges and boreholes rounded
- Height of table side 100 mm
- Boreholes on table sides in diagonal grid
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional Extreme 8.7 PLUS: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 11,5 – 13 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 16 mm
- Boreholes on the surface 50x50 mm grid
- Corners, edges and boreholes rounded
- Height of table side 150 mm
- Boreholes on table side 3 rows with 25 mm spacing, 2 rows with 50 mm spacing
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 17 – 19 mm
- Borehole Ø 22 mm
- Boreholes on the surface 100x100 mm grid
- Corners, edges and boreholes rounded
- Height of table side 150 mm
- Borehole spacing of table side 50 mm
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional Extreme 8.7: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 17 – 19 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 22 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- Height of table side 150 mm
- Borehole spacing of table side 50 mm
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional Extreme 8.7 PLUS: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 17 – 19 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 22 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- Height of table side 250 mm
- Boreholes on table side 4 rows with 50 mm spacing
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Basic 8.7: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 24,5 – 27 mm
- Borehole Ø 28 mm
- Boreholes on the surface in diagonal grid
- Rounded corners and edges
- M12-thread on 4 sides every 200 mm
- 8x45° chamfer for table leg mounting

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional 750: premium steel S355J2+N + Plasma nitration
- Material thickness approx. 24,5 – 27 mm
- Borehole Ø 28 mm
- Boreholes on the surface 100x100 mm grid
- Corners, edges and boreholes rounded
- Height of table side 200 mm
- Borehole spacing of table side 50 mm
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional Extreme 8.7: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 24,5 – 27 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 28 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- Height of table side 200 mm
- Boreholes on table sides in diagonal grid
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Professional Extreme 8.8 PLUS: Through-hardened tool steel X8.8 + Plasma nitration
- Material thickness approx. 24,5 – 27 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 28 mm
- Boreholes on the surface in diagonal grid
- Corners, edges and boreholes rounded
- Height of table side 300 mm
- Boreholes on table side 3 rows with 50 mm spacing, 2 rows with 100 mm spacing
- With scaling on the surface
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Welding Table:
- Hexagon Slot Table: Through-hardened tool steel X8.7 + Plasma nitration
- Material thickness approx. 24,5 – 27 mm
- Table side panel made of high quality steel S355J2+N + Plasma nitration
- Borehole Ø 28 mm
- Boreholes on the surface 100x100 mm grid
- with transverse slots in a hexagon shape
- Hexagon Slot distance 100 mm
- Corners, edges and boreholes rounded
- Height of table side 200 mm
- Boreholes on table sides in diagonal grid
- Construction reinforced with ribbing

‐ Offer valid from 01.03.2023 – 29.02.2024

Burnished Fast Clamping Bolt with twistlock, perfect connecting element between Siegmund components. It features especially large balls, which protect the bevel of the boreholes as a result of low surface pressure. The fourth ball located in the center, reduces internal friction and strengthens the power of the handwheel. The new design of the bolt is not equipped with O-rings, but it still is easy to clean.

Note: This bolt MUST NOT be used for connecting tables and U-shaped squares!

Clamping torque dependent on table type.

‐ for clamping 3 components
‐ burnished
‐ with screw top
‐ with hexagon socket (Size 6)