Clamping system
 
New clamping system
for the simple creation of series fixtures with templates
Start now

Specifications

Products

Assembly instructions

Details

New clamping system

After a long period of development, we present you a completely new, groundbreaking clamping system.

Aim of the process was to develop a quick and economic fixture system with compact and standardized components primarily for the use of robotics but also for small, recurring series.

In combination with one of our new perforated plates, ideally with full grid, you receive an economic serial fixture system. Since no standardized quick-change clamps were available on the market, new sturdy quick-change clamps have been developed therefore. As template customer-sided laser cut profiles are used.

Modular system for configuration

Modular system for maximum flexibility

More information >

Working with templates

T-Slots for attaching templates, e.g. laser templates, 3D printed parts, etc.

More information >

Individual height

Components heights set by aluminum profile length


More information >

Quick-Change Clamp

Optional versions and sizes

More information >

Create your individual fixture system in only a few steps.

Profiles available in fixed lengths and round bars

Define the height of the square

  • Cut the aluminum profile to the required length
  • Note the minimum height of the cut
  • Ensure cut edges are square
  • Deburr the profile after sawing

Fasten the base plate

  • Fasten aluminum profile using self tapping screws
  • When the screws are screwed in, a thread is created in the profile
  • Thread cutting is not required with self tapping screws
  • Maximum torque: 20 Nm

Insert square nuts

  • Insert square nuts in the T-Slot of the aluminum profiles
  • For fastening customer-side templates (material thickness 5 – 6 mm) or optionally also lateral fastening of quick-change clamps with M8x12 screws

Fasten the cover plate

  • Fasten aluminum profile using self tapping screws
  • When the screws are screwed in, a thread is created in the profile
  • Thread cutting is not required with self tapping screws
  • Maximum torque: 20 Nm

Mount accessories

  • Mount the quick-change clamp directly on the cover plate
  • The quick-change clamp can also be attached using an adapter
  • Fastening of clamps, squares, stops and prisms in system 16 boreholes possible

Clamp the device

  • Attachment to perforated plate, welding table or slot table with fast clamping bolts
  • If required, use a M8x12 screw to fasten the customized template to a square nut

Video instructions

YouTube has been disabled. Further information you can find in our Data Protection Declaration

Aluminum profiles

Individual height adjustment from cut lengths
schweißer

Aluminum profile 100 T 76 mm

$ 9.00
2-CS000172.1
Stock item
Buy now

Aluminum profile 100 T 101 mm

$ 14.00
2-CS000172.2
Stock item
Buy now

Aluminum profile 100 T 126 mm

$ 17.00
2-CS000172.3
Stock item
Buy now

Aluminum profile 100 T 151 mm

$ 21.00
2-CS000172.4
Stock item
Buy now

Aluminum profile 100 T 176 mm

$ 24.00
2-CS000172.5
Stock item
Buy now

Aluminum profile 100 T 201 mm

$ 27.00
2-CS000172.6
Stock item
Buy now

Aluminum profile 100 T 226 mm

$ 30.00
2-CS000172.7
Stock item
Buy now

Aluminum profile 100 T 251 mm

$ 33.00
2-CS000172.8
Stock item
Buy now

Aluminum profile 100 T 276 mm

$ 36.00
2-CS000172.9
Stock item
Buy now

Aluminum profile 100 T 2000 mm

$ 130.00
2-CS000172
Stock item
Buy now

Cover plate & Base plate

Cover plate

Base plate

Description

The cover plate serves as a tool holder, e.g. for quick-change clamps, squares or stops.
The base plates can easily be fixed to Siegmund perforated plates and welding tables using the system bore holes.
1

Borehole
For attachment to the aluminum profile with self-tapping screws M8x25

2

System borehole Ø 16 mm
For inserting Siegmund accessories e.g. clamps, squares, stops and prisms

3

Threaded boreholes M8
For fastening quick-change clamps using M8x16 screws

 

1

Borehole
For attachment to the aluminum profile with self-tapping screws M8x25

2

System borehole
For fastening in system boreholes, e.g. on a perforated plate or welding table

 

 

Cover plate, Base plate, Adapter Plates & Accessories

Modular system for maximum flexibility

Base plate 100 radial ‐ nitrided

$ 30.00
2-CS160192
Stock item
Buy now

Base plate 100 linear left ‐ nitrided

$ 32.00
2-CS160193
Stock item
Buy now

Base plate 100 linear right ‐ nitrided

$ 32.00
2-CS160194
Stock item
Buy now

Adapter plate with hole pattern for Toggle Clamp ‐ nitrided

$ 25.00
2-CS000183
Stock item
Buy now

Adapter plate without hole pattern for Toggle Clamp ‐ nitrided

$ 17.00
2-CS000184
Stock item
Buy now

Adapter with Hole Pattern Ø 60 / 15 eccentric ‐ burnished

$ 30.00
2-CS160715.4
Stock item
Buy now

Base plate 170 radial ‐ nitrided

$ 73.00
2-CS220192
Stock item
Buy now

Base plate 170 linear left ‐ nitrided

$ 82.00
2-CS220193
Stock item
Buy now

Base plate 170 linear right ‐ nitrided

$ 82.00
2-CS220194
Stock item
Buy now

Adapter with Hole Pattern Ø 70 / 15 eccentric ‐ burnished

$ 30.00
2-CS220715.4
Stock item
Buy now

Base plate 175 radial ‐ nitrided

$ 68.00
2-CS280192
Stock item
Buy now

Base plate 175 linear left ‐ nitrided

$ 78.00
2-CS280193
Stock item
Buy now

Base plate 175 linear right ‐ nitrided

$ 78.00
2-CS280194
Stock item
Buy now

Adapter with Hole Pattern Ø 70 / 15 eccentric ‐ burnished

$ 30.00
2-CS280715.4
Stock item
Buy now

Adapter with Hole Pattern Ø 70 / 40 eccentric ‐ burnished

$ 41.00
2-CS280715.5
Stock item
Buy now

Clamp Bushing for M8 thread

$ 11.00
2-160546.1
Stock item
Buy now

Clamp Bushing for M8 thread

$ 16.00
2-220546.1
Stock item
Buy now

Clamp Bushing for M8 thread

$ 21.00
2-280546.5
Stock item
Buy now

Cover plate 100 ‐ nitrided

$ 40.00
2-CS000181
Stock item
Buy now

Set Spacer plate 5 mm pack of 5 ‐ Stainless Steel

$ 25.00
2-CS000185.Set
Stock item
Buy now

Set Screws M8x12 pack of 50

$ 11.00
2-CS009002
Stock item
Buy now

Set Screws M8x16 pack of 50

$ 11.00
2-CS009003
Stock item
Buy now

Set Self-tapping screws M8x25 pack of 50

$ 11.00
2-CS009001
Stock item
Buy now

Set Square nuts M8 pack of 50

$ 5.00
2-CS009004
Stock item
Buy now
Vertical clamp 1800
Horizontal clamp 2800
Horizontal Toggle Clamp 2500
Vertical clamp 2200
Horizontal clamp 3500
Horizontal Toggle Clamp 4000
max. holding force 1,8 kN
max. holding force 2,8 kN
max. holding force 2,5 kN
max. holding force 2,2 kN
max. holding force 3,5 kN
max. holding force 4 kN
 
with less interference contour compared to vertical clamps
 
 
with less interference contour compared to vertical clamps
 
opening angle 110°
opening angle 90°
 
opening angle 105°
opening angle 90°
 
without adapter
Hole pattern 40x20 mm
without adapter
Hole pattern 40x20 mm
without adapter
Hole pattern 40 mm
without adapter
Hole pattern 40x40 mm
without adapter
Hole pattern 40x40 mm
without adapter
Hole pattern 40 mm
Length: 104 mm
Width: 56 mm
Height: 190 mm
Weight: 0,43 kg
Length: 245 mm
Width: 56 mm
Height: -
Weight: 0,43 kg
Length: 120 mm
Weight: 0,51 kg
Length: 151 mm
Width: 58 mm
Height: 220 mm
Weight: 0,70 kg
Length: 295 mm
Width: 58 mm
Height: -
Weight: 0,73 kg
Length: 180 mm
Weight: 1,00 kg
Item No. 2-CS009082
Item No. 2-CS009092
Item No. 2-CS009083
Item No. 2-CS009084
Item No. 2-CS009094
Item No. 2-CS009093
Buy now
Buy now
Buy now
Buy now
Buy now
Buy now

Which table top is the right one?

Need help? Contact us.
Perforated plate Premium Light
Perforated plate S355J2+N
Perforated plate X8.7

Description

System 28
System 22
System 16
Borehole Ø 28 mm
Borehole Ø 22 mm
Borehole Ø 16 mm
Through-hardened tool steel X8.7
Premium Light
premium steel S355J2+N
Through-hardened tool steel X8.7
Plasma nitration and BAR-Coating
Plasma nitration and BAR-Coating
Plasma nitration and BAR-Coating
1200 x 800 mm:
Boreholes on the surface 100x100 mm grid

1500 x 1000 mm & 2000 x 1000 mm:
Boreholes on the surface in diagonal grid
Boreholes on the surface 100x100 mm grid
Boreholes on the surface 50x50 mm grid
Material thickness approx. 15 mm
Material thickness approx. 17 – 19 mm
Material thickness approx. 11,5 – 13 mm
1200 x 800 mm | 1500 x 1000 mm | 2000 x 1000 mm
1200 x 800 mm
1200 x 800 mm | 1500 x 1000 mm | 2000 x 1000 mm
Weight work top:
approx. 112 kg | approx. 162 kg | approx. 217 kg
Weight work top:
approx. 138 kg
Weight work top:
approx. 88 kg | approx. 135 kg | approx. 179 kg

Special Promotion

Starter set 28

1x
CS000172
4x
CS000181
4x
CS280192
2x
800653.N
1x
CS009001
1x
CS009002
1x
CS009003
1x
CS009004
Consisting of:

1x CS000172 (Aluminum profile 100 T 2000 mm)
4x CS000181 (Cover plate 100)
4x CS280192 (Base plate 175 radial)
2x 800653.N (Spacer Ring for Premium Light pack of 4)
1x CS009001 (Self-tapping screws M8x25 pack of 50)
1x CS009002 (Screws M8x12 pack of 50)
1x CS009003 (Screws M8x16 pack of 50)
1x CS009004 (Square nuts M8 pack of 50)
More information
$ 579.00
Item No. 4-CS280001
Stock item
Buy now

Starter set 22

1x
CS000172
4x
CS000181
4x
CS220192
1x
CS009001
1x
CS009002
1x
CS009003
1x
CS009004
Consisting of:

1x CS000172 (Aluminum profile 100 T 2000 mm)
4x CS000181 (Cover plate 100)
4x CS220192 (Base plate 170 radial)
1x CS009001 (Self-tapping screws M8x25 pack of 50)
1x CS009002 (Screws M8x12 pack of 50)
1x CS009003 (Screws M8x16 pack of 50)
1x CS009004 (Square nuts M8 pack of 50)
More information
$ 573.00
Item No. 4-CS220001
Stock item
Buy now

Starter set 16

1x
CS000172
4x
CS000181
4x
CS160192
1x
CS009001
1x
CS009002
1x
CS009003
1x
CS009004
Consisting of:

1x CS000172 (Aluminum profile 100 T 2000 mm)
4x CS000181 (Cover plate 100)
4x CS160192 (Base plate 100 radial)
1x CS009001 (Self-tapping screws M8x25 pack of 50)
1x CS009002 (Screws M8x12 pack of 50)
1x CS009003 (Screws M8x16 pack of 50)
1x CS009004 (Square nuts M8 pack of 50)
More information
$ 414.00
Item No. 4-CS160001
Stock item
Buy now

Build fixtures yourself

Individual fixtures can be assembled from aluminum profiles together with various cover and base plates. Small to large fixtures can be easily and quickly built at minimum cost. All tooling is reusable.

Specifications

  • Modular system for maximum flexibility
  • For system 16, 22 and 28
  • All parts can be reused
  • On going development of the product range
  • We recommend Siegmund perforated plates, welding tables or slot tables as a basis

Working with templates

Whether parts are from a laser or 3D printer, parts can be attached to the profile in the T-Slot with square nuts and screws.
  • T-Slots for attaching templates, e.g. laser templates, 3D printed parts, etc.
  • Templates are aligned using the table surface

Individual height

  • Components heights set by aluminum profile length
  • Individual height adjustment from cut lengths
  • Profiles available in fixed lengths and round bars

Quick-Change Clamp

  • Rapid clamping and release
  • Ergonomic clamp handle
  • Optional versions and sizes
  • All with Siegmund hole pattern

Cost example

without table and laser cut profiles

Accessories
26x Bolt, 1x Square, x Prism $ 1,422.00

Clamping system
7x Aluminum profile 101 mm, 2x Aluminum profile 126 mm,
1x Aluminum profile 176 mm, 7x Cover plate,
10x Base plate, 102x Screws,
6x Quick-Change Clamp, 1x Adapter,
2x Adapter Plate $ 1,104.00

Assembly time approx. 2,5 hours

Compatibility

  • The fixture system is compatible with all the Siegmund product range.

Your data


* is a mandatory field and has to be filled in
Send
Cancel
By clicking the "send" button, the data entered in the form above will be collected and processed for the purpose of processing your request. All data is encrypted and processed only within the scope of the data privacy policy. You have a right of objection with effect for the future.
close window

The item has been added to your shopping cart.

Your shopping cart
Continue shopping