Basic 28 Welding Tables Bernd Siegmund GmbH
System 28

Welding Tables

System 22

Welding Tables

System 16

Welding Tables



Rail System

Rail System

Platform System

Platform System


Basic welding tables are manufactured of S355J2+N steel. They are suited for working on light superstructures. Since the steel tables are not nitrided and coated, their surface is more susceptible to welding spatters and corrosion.
1. Material thickness

approx. 24,5 – 27 mm

2. Material

premium steel S355J2+N*

Vickers hardness grade:
Basic hardness approx. 165 – 220

* Unprotected against rust, scratches and welding spatters. Protection against welding spatters is only given by using anti-spatter spray.

3. Data

  • Borehole spacing 100 mm
  • Grid element spacing 100 mm

4. Table side panel

  5. Elaborate Radiuses

  • 3 mm radius of top table edge reduces damages to Siegmund accessories and customers components
  • 6 mm radius on edges reduces risk of injury

6. System borehole

  • Ø 28,15 mm

Radius R3 for boreholes on the table surface:

  • reduce damages to table, Siegmund accessories and customer components
  • less adherence of welding spatters on bore edges
  • for simple insertion of bolts and accessories

7. Threaded bore hole

  • all System 28 Basic Tables incl. thread holes every 200 mm on 4 sides
  • M12 thread for threaded bolt 280543
  8. Table Legs

  • Square pipe 70x70 mm
  • Base plate Ø 70 mm (made of twisted bulk material)
  • Leg 40 mm vernier adjustment
(Data only for Leg standard equipment)

9. Bearing load

Bearing load per leg: max. 1,000 kg
Maximum recommended static overall load:
with 4 legs = 2,000 kg
with 6 legs = 3,000 kg
based on even load distribution.
(Data only for leg standard equipment)

Computationally resulting in substantially higher overall loads. However, the indicated bearing loads were calculated with reserves for safety reasons.

Please consult with manufacturer if higher overall loads are required.