Stainless Steel

---

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

‐ premium stainless steel X5CrNi18-10 (V2A)
‐ Material thickness approx. 11,5 – 13 mm
‐ Borehole Ø 16 mm
‐ Boreholes on the surface 50x50 mm grid
‐ Corners, edges and boreholes rounded
‐ Height of table side 100 mm
‐ Borehole spacing of table side 25 mm
‐ Construction reinforced with ribbing
‐ Grid lines allow precise constructions
‐ Special equipment for welding tables available by request. (>> More information)

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.

Leg Standard Equipment, available in various lengths (special lengths upon request). Load-bearing capacity 1,000 kg, adjustable up to 40 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg standard equipment / Leg with Floor Anchoring System 16) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

The specified load capacities refer to static load.