Read and follow the operating manual in full before use. The lifting table may only be used as intended, in technically sound condition and on a level, load-bearing surface.

Before each use, check for damage, corrosion, the hydraulic system, secure standing and firm attachment of the mounted welding table. Do not use the lifting table if unusual operating behaviour, noises or visible defects are detected.

The permissible load capacity stated in the product specifications must not be exceeded. Welding tables and workpieces must be loaded centrally or evenly, securely fastened and protected against tipping, slipping and falling.

There is a crushing hazard during raising and lowering. Do not reach into the lifting mechanism or guide rails, do not reach under the lifting table or stay underneath it, and keep other persons away from the danger area. Do not step onto the lifting table or use it as a means of access.

Use suitable lifting equipment, lifting accessories and transport brackets when installing, removing or transporting the welding table. Do not stand under suspended loads. Wear suitable personal protective equipment.

Do not make unauthorised modifications. Work on electrical and hydraulic components, as well as maintenance and replacement of defective parts, may only be carried out in accordance with the operating manual by suitably qualified specialist personnel.