Before use, read and observe all available installation, operating and application instructions. Tables, workbenches and accessories may only be used as intended, in technically perfect condition and on a suitable, level and load-bearing surface.

Move heavy components only with suitable lifting and transport equipment. Do not stand under raised loads; secure raised table tops and components against falling. Secure products against tipping, rolling away, slipping and unintended movement.

Do not exceed the permissible loads, clamping forces, torques and application limits specified in the product data. Before processing, safely position and fasten workpieces, assemblies and accessories, and secure them against falling.

There is a risk of crushing, impact and cuts when assembling, positioning and clamping components. Wear appropriate personal protective equipment, especially safety shoes and protective gloves.

When welding, ensure a safe ground connection. The workpiece and table surface must be clean and securely connected with good contact to prevent arcing. Clean and maintain surfaces and holes regularly; do not use unsuitable abrasives or corrosive substances.

Use only compatible and undamaged accessories. Do not make unauthorised modifications.