Bernd Siegmund GmbH

back

Data sheet STEP-Data

Pipe Clamp Universal burnished / nitrided

Price per unit:

$ 131

Stock item

Article number:

2-220604.1

ERP number:

22001381

System:
GTIN:	4251805913583
Width:	265 mm
Height:	210 mm
Weight:	1,87 kg
max. clamping force:	1,40 kN

Pipe Clamp Universal burnished / nitrided

Article number : 2-220604.1

ERP number: 22001381

${fullPrice}

Article number: 2-220604.1

ERP number: 22001381

plus sales tax, shipping and handling charges

Article number : 2-220604.1

ERP number: 22001381

plus sales tax, shipping and handling charges

Pipe Clamp Universal, with swiveling Arbor enables flexible clamping at a + / - 42 degree angle. This Pipe Clamp combines the advantages of conventional 45° or 90° clamps. It can be used at an angle as well as straight, resulting in additional clamping options and a more variable clamping range.

The horizontal round tube with a length of 200 mm is fully adjustable and creates, combined with the swiveling arbor, a variable clamping range. The length of the vertical pipe is 250 mm.

To integrate the vertical pipe into the system boreholes, an adjusting ring is used (Item No. 220653). As a standard feature, the Round Pipe Clamp Universal is equipped with a 135 mm threaded arbor.

A long lifetime and efficiency is guaranteed by the high-quality material, as well as the option to order spare parts individually.

- interchangeable prism
- ball diameter spindle 10 mm
- Trapezoid thread of spindle 16x4 mm

1x220677
1x220678.1
1x220679
1x220634.1
1x220657.1
1x220653
Clamps

Learn more about this product here
Before use, read and observe all available installation, operating and application instructions. Tables, workbenches and accessories may only be used as intended, in technically perfect condition and on a suitable, level and load-bearing surface.

Move heavy components only with suitable lifting and transport equipment. Do not stand under raised loads; secure raised table tops and components against falling. Secure products against tipping, rolling away, slipping and unintended movement.

Do not exceed the permissible loads, clamping forces, torques and application limits specified in the product data. Before processing, safely position and fasten workpieces, assemblies and accessories, and secure them against falling.

There is a risk of crushing, impact and cuts when assembling, positioning and clamping components. Wear appropriate personal protective equipment, especially safety shoes and protective gloves.

When welding, ensure a safe ground connection. The workpiece and table surface must be clean and securely connected with good contact to prevent arcing. Clean and maintain surfaces and holes regularly; do not use unsuitable abrasives or corrosive substances.

Use only compatible and undamaged accessories. Do not make unauthorised modifications.