Bernd Siegmund GmbH

back

Data sheet

Siegmund Roto-Positioner RP 1250 (without table top) incl. rotatable ground connection

Price per unit:

upon request

Item produced on order

Article number:

6R120M16

ERP number:

60001058

GTIN:	4251805934854
Weight:	757 kg
Load capacity:	1250 kg
Max. turning moment table:	490 Nm
Tilting moment:	4900 Nm
Frame width:	750 mm

Siegmund Roto-Positioner RP 1250 (without table top) incl. rotatable ground connection

Article number : 6R120M16

ERP number: 60001058

${fullPrice}

Article number: 6R120M16

ERP number: 60001058

plus sales tax, shipping and handling charges

Article number : 6R120M16

ERP number: 60001058

plus sales tax, shipping and handling charges

TECHNICAL FEATURES

∙ Hydraulic rotation of the clamping plate
∙ Tilting range up to 95°
∙ Hydraulic height adjustment and tilt function

FURTHER DETAILS

∙ Large working area, low height
∙ Optional rotation of the clamping plate with electric drive (still hydraulic height adjustment and tilt function)

The unit is ready for immediate use on power up.

Octagonal tables and U-squares are not included in delivery.

The stable, rotatable ground connection directly on the device ensures an optimal connection to the tabletop even while rotating. The welding device is connected via a pin on the machine. Twisted ground cables are a thing of the past. Rotatable ground connector included.

- Table revolutions per minute: hydraulic: 2 / electric: 0-2
- Operating voltage 400 V 50 Hz
- Tilt angle: 95°
- Vertical movement range (A): 540-1120 mm
- Horizontal movement range (B): 700-1280 mm
- Length (C): 1760 mm
- Width (D): 1630 mm
- Clamping plate diameter (F): Ø 800 mm
Roto-Positioner

Learn more about this product here
Before use, read the operating and maintenance manual in full and observe it. The positioner may only be used as intended for clamping and manually rotating workpieces; it is not intended for lifting loads.

The positioner must be set up securely on a level, load-bearing surface and fastened in accordance with the manual. The permissible load capacity specified in the product data must not be exceeded.

Workpieces must be securely clamped and balanced. Clamping, removal, adjustment and maintenance work may only be carried out when the machine is at a standstill.

There is a risk of injury from rotating and moving parts. Do not reach into the rotating area and keep other persons away from the danger area.

Wear appropriate personal protective equipment. Do not make any unauthorised modifications.