Bernd Siegmund GmbH

back

Professional Screw Clamp 45°/90° nitrided

Data sheet

STEP-Data

Professional Screw Clamp 45°/90° nitrided

Price per unit:

$ 112

Stock item

Article number:

2-220630.1

ERP number:

22001384

System:
GTIN:	4251805913606
Height:	300 mm
Weight:	2,12 kg
max. clamping force:	3,50 kN

Professional Screw Clamp 45°/90° nitrided

Article number : 2-220630.1

ERP number: 22001384

${fullPrice}

Article number: 2-220630.1

ERP number: 22001384

plus sales tax, shipping and handling charges

Article number : 2-220630.1

ERP number: 22001384

plus sales tax, shipping and handling charges

The Professional Screw Clamp 45°/90° replaces conventional 45° or 90° screw clamps. This Screw Clamp sets new standards because of its infinitely variable rotatability from 0°-360°.

The dimensions of the flat bar in use are 30x14 mm.

With the new handwheel on the cast iron cross, the height can be adjusted quickly.
Through the countersunk hexagon socket, located at the top of the handle, the force of the clamp can be adjusted precisely by a torque wrench. Additionally, the vertical bar is reinforced.

A long lifetime and efficiency is guaranteed by the high-quality material, as well as the option to order spare parts individually.

- interchangeable prism
- ball diameter spindle 10 mm
- Trapezoid thread of spindle 16x4 mm
- Vertical Bar reinforced

1x220633
1x280617.2
1x280662.2
1x289109.N.Set
1x229108
1x220634.1
1x220657.1
Clamps

Learn more about this product here
Before use, read and observe all available installation, operating and application instructions. Tables, workbenches and accessories may only be used as intended, in technically perfect condition and on a suitable, level and load-bearing surface.

Move heavy components only with suitable lifting and transport equipment. Do not stand under raised loads; secure raised table tops and components against falling. Secure products against tipping, rolling away, slipping and unintended movement.

Do not exceed the permissible loads, clamping forces, torques and application limits specified in the product data. Before processing, safely position and fasten workpieces, assemblies and accessories, and secure them against falling.

There is a risk of crushing, impact and cuts when assembling, positioning and clamping components. Wear appropriate personal protective equipment, especially safety shoes and protective gloves.

When welding, ensure a safe ground connection. The workpiece and table surface must be clean and securely connected with good contact to prevent arcing. Clean and maintain surfaces and holes regularly; do not use unsuitable abrasives or corrosive substances.

Use only compatible and undamaged accessories. Do not make unauthorised modifications.