Bernd Siegmund GmbH

back

Data sheet STEP-Data

Basic Pipe Clamp 90° nitrided

Price per unit:

$ 100

Stock item

Article number:

2-280608.N

ERP number:

28004891

System:
GTIN:	4251805924336
Height:	230 mm
Weight:	1,42 kg
max. clamping force:	3 kN

Basic Pipe Clamp 90° nitrided

Article number : 2-280608.N

ERP number: 28004891

${fullPrice}

Article number: 2-280608.N

ERP number: 28004891

plus sales tax, shipping and handling charges

Article number : 2-280608.N

ERP number: 28004891

plus sales tax, shipping and handling charges

Round Pipe Clamp 90°, enables precise and powerful clamping of components at a 90° angle relative to the system boreholes. The clamp can be smoothly rotated by 360°, therefore allowing free positioning.

To integrate the vertical pipe into the system boreholes, an adjusting ring is used (Item No. 280653.N).

A long lifetime and efficiency is guaranteed by the high-quality material, as well as the option to order spare parts individually.

- interchangeable prism
- ball diameter spindle 16 mm
- Trapezoid thread of spindle 20x4 mm

1x280676.N
1x280634.1.N
1x280657.1.N
1x280653.N
Clamps

Learn more about this product here
Before use, read and observe all available installation, operating and application instructions. Tables, workbenches and accessories may only be used as intended, in technically perfect condition and on a suitable, level and load-bearing surface.

Move heavy components only with suitable lifting and transport equipment. Do not stand under raised loads; secure raised table tops and components against falling. Secure products against tipping, rolling away, slipping and unintended movement.

Do not exceed the permissible loads, clamping forces, torques and application limits specified in the product data. Before processing, safely position and fasten workpieces, assemblies and accessories, and secure them against falling.

There is a risk of crushing, impact and cuts when assembling, positioning and clamping components. Wear appropriate personal protective equipment, especially safety shoes and protective gloves.

When welding, ensure a safe ground connection. The workpiece and table surface must be clean and securely connected with good contact to prevent arcing. Clean and maintain surfaces and holes regularly; do not use unsuitable abrasives or corrosive substances.

Use only compatible and undamaged accessories. Do not make unauthorised modifications.