Professional 750

---

Professional 750 Table, 1000x1000x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1000x1000x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1200x1200x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1200x1200x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 2000x1000x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 2000x1000x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1200x800x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1200x800x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 2400x1200x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 2400x1200x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1500x1000x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1500x1000x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 3000x1500x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 3000x1500x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 2000x2000x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 2000x2000x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1500x1500x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 1500x1500x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 4000x2000x150 mm, with horizontal / vertical hole arrangement in a 100 mm grid on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm. The table has a material thickness of approx. 17-19 mm and is manufactured of high-quality S355J2+N steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Professional 750 Table, 4000x2000x150 mm, with diagonal hole arrangement on the table top and a parallel hole pattern in a 50 mm grid on the sides. The diameter of the boreholes is 22 mm, the thickness of the material is 17-19 mm. It is manufactured of high quality S355J2+N Steel. Grid lines with a spacing of 100 mm simplify the set-up of your device.

The welding tables are equipped with scaling as standard.

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with Caster and Locking Brake, load-bearing capacity 800 kg per caster. Each leg can be height-adjusted up to 20 mm (vernier adjustment), by turning the spacer plate and is equipped with a reinforced arbor.

‐ 20 mm vernier adjustment

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 700-1050 mm adjustable

Leg is height adjustability in a range of 500-800 mm or 550-900 mm. The load-bearing capacity remains 1,000 kg, regardless of height. A second lock bolt ensures additional stability. The leg can be vernier adjusted up to 50 mm.

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 160859 for Leg height-adjustable System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment
‐ Table height 650-950 mm adjustable

Leg height-adjustable with Caster and Locking Brake, load-bearing capacity 800 kg and vernier adjustable up to 20 mm.

‐ 20 mm vernier adjustment
‐ Table height 750-1000 mm adjustable

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg Basic Equipment, available in various lengths (special lengths upon demand). The load- bearing capacity of the leg is 1,000 kg, height adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment

Leg with floor anchoring, load-bearing capacity of 1,000 kg and suitable for all applications that demand stability. Leg is adjustable up to 50 mm (vernier adjustment).

Our recommendation: Sleeve for Table Leg for every table leg with foot plate (Item No. 280859.1 for Leg standard equipment / Leg with Floor Anchoring System 22) (not included in the delivery)

Leg Boot protects threaded arbor from dirt and prevents damages to the welding hose, due to the constant contact with the threaded arbor.

‐ 50 mm vernier adjustment