Bernd Siegmund GmbH

back

Data sheet STEP-Data

Pipe Clamp Universal burnished

Price per unit:

$ 120

Stock item

Article number:

2-160604

ERP number:

16001916

System:
GTIN:	4251805905847
Width:	165 mm
Height:	150 mm
Weight:	0,7 kg
max. clamping force:	0,60 kN

Pipe Clamp Universal burnished

Article number : 2-160604

ERP number: 16001916

${fullPrice}

Article number: 2-160604

ERP number: 16001916

plus sales tax, shipping and handling charges

Article number : 2-160604

ERP number: 16001916

plus sales tax, shipping and handling charges

Pipe Clamp Universal, with swiveling Arbor enables flexible clamping at a + / - 42 degree angle. This Pipe Clamp combines the advantages of conventional 45° or 90° clamps. It can be used at an angle as well as straight, resulting in additional clamping options and a more variable clamping range.

The horizontal round tube with a length of 150 mm is fully adjustable and creates, combined with the swiveling arbor, a variable clamping range. The length of the vertical pipe is 150 mm.

To integrate the vertical pipe into the system boreholes, an adjusting ring is used (Item No. 160653).

A long lifetime and efficiency is guaranteed by the high-quality material, as well as the option to order spare parts individually.

- interchangeable prism
- ball diameter spindle 8 mm
- Trapezoid thread of spindle 12x3 mm
- clamping at an angle of +/- 42°
- fastening with an adjusting ring

1x160677
1x160678
1x160679
1x160634.1
1x160656
1x160653
Clamps

Learn more about this product here
Pipe Clamp Universal

Watch assembly video here
Before use, read and observe all available installation, operating and application instructions. Tables, workbenches and accessories may only be used as intended, in technically perfect condition and on a suitable, level and load-bearing surface.

Move heavy components only with suitable lifting and transport equipment. Do not stand under raised loads; secure raised table tops and components against falling. Secure products against tipping, rolling away, slipping and unintended movement.

Do not exceed the permissible loads, clamping forces, torques and application limits specified in the product data. Before processing, safely position and fasten workpieces, assemblies and accessories, and secure them against falling.

There is a risk of crushing, impact and cuts when assembling, positioning and clamping components. Wear appropriate personal protective equipment, especially safety shoes and protective gloves.

When welding, ensure a safe ground connection. The workpiece and table surface must be clean and securely connected with good contact to prevent arcing. Clean and maintain surfaces and holes regularly; do not use unsuitable abrasives or corrosive substances.

Use only compatible and undamaged accessories. Do not make unauthorised modifications.